Vanessa 16th Mar 2016 The POWERbreathe K-Series seems to lose connection with Breathe-Link® application when inactive for some time Depending upon your computer settings when your computer goes into standby mode the USB communication can also shut down; consequently […] Read More FAQs | Troubleshooting K-Series
Vanessa 16th Mar 2016 The values produced on the POWERbreathe K-Series device and Breathe-Link® IMT suite do not correlate Values from the POWERbreathe device and Breathe-Link® software should not vary more then +-10% + 5 cmH20. To consistently breathe […] Read More FAQs | Troubleshooting K-Series
Vanessa 16th Mar 2016 The POWERbreathe unit load result is a different measurement compared to the Breathe-Link® software pressure result The POWERbreathe unit load displayed corresponds to the highest training load achieved (highest weight lifted) during your breathing training session. […] Read More FAQs | Troubleshooting K-Series
Vanessa 16th Mar 2016 When I start up the Breathe-Link® Software I get ‘invalid device connected’ Make sure the software you have downloaded or been supplied with is correct for the model of POWERbreathe K-Series that […] Read More FAQs | Troubleshooting K-Series
Vanessa 16th Mar 2016 The POWERbreathe K-Series device fails to operate when plugged into my PC/MAC Make sure that the correct drivers have been installed. Uninstall and reinstall the Breathe-Link® software making sure that you agree […] Read More FAQs | Troubleshooting K-Series
Vanessa 16th Mar 2016 On the K5 Pro screen, during a breath, pressure load seems to drop off rapidly mid breath The POWERbreathe device will try to maintain a variable load for each breath, if you fail to overcome the load […] Read More FAQs | Troubleshooting K-Series
Vanessa 16th Mar 2016 Why do I sometimes get weird spikes on my graphs? Make sure the valve is not sticky. If the valve is blocked then you may see erroneous results. The spikes […] Read More FAQs | Troubleshooting K-Series
Vanessa 16th Mar 2016 When I increase and decrease the training load the POWERbreathe device seems to lock up In most cases you should not see a lock up of the POWERbreathe K-Series device, however in some rare instances […] Read More FAQs | Troubleshooting K-Series
Vanessa 16th Mar 2016 During an Auto and Manual training session I cannot adjust the training loads for the first 5 breaths with the load adjuster The first two breaths are setup breaths so that he device can calculate training parameters used to set up an […] Read More FAQs | Troubleshooting K-Series
Vanessa 16th Mar 2016 I cannot change the load for the first two breaths in all training modes The first two breaths are setup breaths so that the device can calculate training parameters used to set up an […] Read More FAQs | Troubleshooting K-Series
Vanessa 16th Mar 2016 My K-Series device is not charging 1. In some instances if the POWERbreathe K-Series device is left unused for a period of time the unit will […] Read More FAQs | Troubleshooting K-Series
