Your POWERbreathe Smart Adaptor is a rechargeable, electronic device. It therefore must NOT be immersed in water, or exposed to running water, as this will damage the electronics and void your warranty.

There are two parts to your POWERbreathe Smart Adaptor:

  1. The electronic POWERbreathe Smart Adaptor multibody itself (multibody because it houses the ‘Strength Test Plug’).
  2. The ‘Strength Test Plug’, for breathing strength testing only, housed within your POWERbreathe Smart Adaptor.

Cleaning the Electronic POWERbreathe Smart Adaptor

Important Note: To ensure the longevity and proper function of your electronic POWERbreathe Smart Adaptor, we recommend cleaning it with a POWERbreathe Smart Adaptor HypaClean Moist Wipe regularly after each use. As the Smart Adaptor is an electronic device, it should NOT be submerged in water or placed under running water at any time.

POWERbreathe Smart Adaptor HypaClean Moist Wipes (Pack of 100)

POWERbreathe Smart Adaptor HypaClean Moist Wipes (Pack of 100)

Shop now

The POWERbreathe Smart Adaptor is not designed to be, nor supplied, as sterile, so we recommend cleaning it before use.

  • Ensure the USB Port Cover is plugged into the USB Port and the POWERbreathe Smart Adaptor is switched off before cleaning.
  • Remove the separate mouthpiece from the main body. Using the wipes supplied in your initial pack, or similar suitable cleansing wipes, wipe over the main body, removing any visible soiling (after use), paying special attention to the mouth and airway area.
  • The separate mouthpiece can be cleaned in the same way as you would clean the mouthpiece for your POWERbreathe breathing device BUT make sure that you remove the separate mouthpiece from the POWERbreathe Smart Adaptor first.
  • After cleaning your Smart Adaptor with the cleansing wipe, put it aside to completely dry before using. Placing it to one side with the POWERbreathe swirl facing upwards will ensure good air circulation.
  • When completely dry and not in use, place your POWERbreathe Smart Adaptor in the supplied protective case.
  • Wipe clean your POWERbreathe Smart Adaptor after each use.

Warning!

  • Because the POWERbreathe Smart Adaptor is an electronic device, you must not immerse it in water, or expose it to running water, as this will damage the electronics and void your warranty.
  • It is also important to note that your POWERbreathe Smart Adaptor is unsuitable for cleaning or sterilisation by boiling, steam, microwave, oven, dishwasher or autoclave – or any cleaning process that uses high temperatures, including very hot water.
  • Do not use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean your Smart Adaptor.

Cleaning the Strength Test Plug

  • After each breathing strength test, you can rinse the ‘Strength Test Plug’ in warm running water because this component is not electronic.
  • After every few uses, soak the ‘Strength Test Plug’ in a mild cleansing solution, such as POWERbreathe Cleansing Tablets, along with your POWERbreathe breathing training device and its mouthpiece, according to the instructions in the user manual.
POWERbreathe Cleansing Tablets (24)

POWERbreathe Cleansing Tablets (24)

Shop now